Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex...

This premilled titanium blank is engaging, is 14mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.061 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This premilled titanium blank is engaging, is 14mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.005 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This titanium temporary abutment comes with a screw, SKU 19.110, that takes a 0.050/1.27 mm Hex screwdriver. It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain® Low Profile &...

This titanium temporary abutment comes with a screw, SKU 19.055, that takes a 0.048/1.20 mm Hex screwdriver. It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain® Low Profile &...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex Driver.

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex...

This ti base comes with a final screw, SKU 19.033 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 2.0mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.030 that takes a Nobel® Unigrip/Star driver. The torque is 35 ncm. This ti base has a 2.0mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.033 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 2.0mm collar height and is no longer being made with an anti-rotational flat side. Wax up...

This ti base comes with a final screw, SKU 19.030 that takes a Nobel® Unigrip/Star driver. The torque is 35 ncm. This ti base has a 2.0mm collar height and is no longer being made with an anti-rotational flat side. Wax up...

This ti base comes with a final screw, SKU 19.055, that takes a 0.048/1.20 mm Hex screwdriver. This ti base has a 0.3mm collar height and has a 6mm chimney height. The torque is 15 ncm and is no longer being made with an anti-rotational flat...

This 10 pack of analogs is for both a stone model and a digital model use.

This 10 pack of analogs is for both stone model and digital model use.

This 10 pack of analogs is for both a stone model and a digital model use. Anodized with the color blue. 

For digital models. For the 3.75, 4.5, 5.5 and 6.5mmD implants. RB and WB are the same connection (TorcFit) Ø2.7 mm but WB has wider shoulder.

This 10 pack of analogs is for both a stone model and a digital model use. Anodized with the color blue.

This analog is for a digital model use. Anodized with the color blue.

This analog is for a digital model use. Anodized with the color yellow.

This 10 pack of analogs is for both a stone model and a digital model use. Anodized with the color purple.