This ti base comes with a wax up sleeve and a final screw, SKU 19.045 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 0.3mm collar height.

This ti base comes with a final screw, SKU 19.044 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 0.5mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a wax up sleeve and a final screw, SKU 19.045 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 0.3mm collar height and is no longer being made with an anti-rotational flat side.

This ti base comes with a wax up sleeve and a final screw, SKU 19.044 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 0.5mm collar height and is no longer being made with an anti-rotational flat side.

This titanium temporary abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.044

This titanium temporary abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.044

This titanium temporary abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.044

This titanium temporary abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.044

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex Driver.

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex...

This analog is for both stone model and digital model use.

This analog is for both stone model and digital model use.

This analog is for both stone model and digital model use.

This analog is for both stone model and digital model use.

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver.  Torque is 20ncm. It is compatible with Hiossen® (Osstem®) - Mini, Camlog® - 3.8 and 4.3, and Neodent® GM...

This is a final screw that takes a .050/1.27mm hex driver.  Torque is 20ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw that takes a .050/1.27mm hex driver.  Torque is 20ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This angled multiunit abutment comes with a DLC screw that takes the .048/1.20mm Hex DriverA DLC coating is a diamond like coating that provides a low friction surface for a better hold. It is compatible with the...

This healing abutment is screwed into the implant using a .048/1.20mm hex driver.

This healing abutment is screwed into the implant using a Nobel® Unigrip/Star driver.