This is a 10 pack of final screws that take a Nobel® Unigrip/Star driver.  Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw with a DLC coating that takes a Nobel® Unigrip/Star driver.  Torque is 35ncm. A DLC coating is a diamond like coating that provides a low friction surface for a better hold. All of our screws are stress tested to 150%...

This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 35ncm. It is compatible with Nobel® Active - 3.5 (NP) and Nobel® Branemark - 3.5 (NP). All of our screws are stress tested to 150% of the...

This is a 10 pack of final screws that take a Straumann® Torx driver.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a 10 pack of final screws that take a 1.22mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This final screw that takes a 0.050/1.27mm Hex driver.  Torque is 15Ncm.It is compatible with Astra® Osseospeed 20º and 45º UniAbutments.  There are 10 screws in the package.  It is compatible with...

This is a 10 pack of final screws that take a .050/1.27mm hex driver.   Torque is 25ncm.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a 10 pack of final screws that take a .050/1.27mm hex driver. Torque is 20ncm.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a 10 pack of final screws that take a .050/1.27mm hex driver. It is compatible with Zimmer®/BioHorizons®/Implant Direct Legacy® - Internal hex - 3.5 , 4.5, and 5.7; and MIS® Seven - Standard and Wide. All of our screws are stress...

This is a 10 pack of final screws that take a .048/1.20mm hex driver. Torque is 20ncm.  It is compatible with 3i® Certain - Internal Hex - 3.4, 4.1, and 5.0. All of our screws are stress tested to 150% of the nominal torque value and...

This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm. It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain® Low Profile & 3i...

This is a 10-pack of final screws that take a Nobel® Unigrip/Star driver.  Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw that takes a Nobel® Unigrip/Star driver.  Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This 10 pack of analogs is for both stone model and digital model use. It's compatible with the Locator® components.

This 10 pack of analogs is for only stone models, NOT for digital models. It has a 4.5mm diameter and has a thicker wall than SKU 14.048P10

This 10 pack of analogs is for both stone model and digital model use. It has a 3.5mm diameter and a thinner wall than SKU 14.049P10

This 10 pack of analogs is for both stone model and digital model use. It is compatible with the following multiunit connections: Nobel® Branemark - 5.0.

This 10 pack of analogs is for both stone model and digital model use.

This 10 pack of analogs is for both stone model and digital model use.

This 10 pack of titanium analogs is for both stone model and digital model use. Anodized with the color yellow.