This scan body is made of PEEK Plastic and is used for scanning at the implant level. With screw - SKU 19.016

This final screw that takes a 0.050/1.27mm Hex driver.  Torque is 15Ncm.It is compatible with Astra® Osseospeed 20º and 45º UniAbutments. It is compatible with the following top (Ø 4.8 mm) of Multiunit...

This is a final screw that takes a .050/1.27mm hex driver.    Torque is 25ncm.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 -...

This is a final screw that takes a .050/1.27mm hex driver.  Torque is 20ncm.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.016P10 

This is a final screw that takes a .048/1.20mm hex driver.  Torque is 20ncm.  It is compatible with 3i® Certain - Internal Hex - 3.4, 4.1, and 5.0. All of our screws are stress tested to 150% of the nominal torque value and can...

This is a final screw that takes a Straumann® Torx driver.  Torque is 35ncm.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.033P10

This is a final screw that takes a Straumann® Torx driver.  Torque is 35ncm.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.032P10

This is a final screw with a DLC coating that takes a Nobel® Unigrip/Star driver.  Torque is 35ncm. A DLC coating is a diamond like coating that provides a low friction surface for a better hold.  All of our screws are stress tested to...

This is a final screw with a DLC coating that takes a Nobel® Unigrip/Star driver.  Torque is 35ncm. A DLC coating is a diamond like coating that provides a low friction surface for a better hold. It is compatible with Nobel®...

This is a final screw with a DLC coating that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm.A DLC coating is a diamond like coating that provides a low friction surface for a better hold. It is compatible with the...

This is a flat seat final screw that takes a Nobel® Unigrip/Star driver.  Torque is 35ncm. It is compatible with Nobel® Branemark- 3.5 (NP). All of our screws are stress tested to 150% of the nominal torque value and can also...

This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.030P10

This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19...

This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 35ncm. It is compatible with both Nobel® Active - 3.5 (NP) and Nobel® Branemark - 3.5 (NP). All of our screws are stress tested to 150% of the...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a Nobel®...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a Nobel®...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a Nobel®...

It is designed for use with the Straumann® 1.5 abutment or the DESS Converter Abutments. Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be...

It is designed for use with the Straumann Tissue Level implants. Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex Driver.