This is a final screw with a DLC coating that takes a DESS Angulated Screw Channel driver. Torque is 15Ncm.A DLC coating is a diamond like coating that provides a low friction surface for a better hold.    ▶ It is compatible with...

This is a final screw with a DLC coating that takes a DESS Angulated Screw Channel driver. Torque is 15Ncm.A DLC coating is a diamond like coating that provides a low friction surface for a better hold.  There are 10 screws in...

The final screw requires the use of a 0.050/1.27 Hex screwdriver. Torque is 15Ncm.  There are 10 screws in the package.  ▶ It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments without any...

The final screw requires the use of a 0.048/1.22 Hex screwdriver. Torque is 15Ncm.  There are 10 screws in the package.  ▶ It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments without any Ti Bases:  3i...

The final screw requires the use of a 0.048/1.20 Hex screwdriver. Torque is 15Ncm.  There are 10 screws in the package.  ▶ It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments without any...

This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm.  There are 10 screws in the package.  ▶ It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments without any...

This is an Flat Seat Screw final screw that takes the DESS Angulated Screw Channel driver. Torque is 15Ncm.It can be used to move the screw access hole up to 25 degrees in any direction.  There are 10 screws in the package.  ▶ It is...

This is an Flat Seat Screw final screw that takes the DESS Angulated Screw Channel driver. Torque is 15Ncm.It can be used to move the screw access hole up to 25 degrees in any direction. ▶ It is compatible with the following top (Ø 4.8...

This latch style driver is made of stainless steel and is compatible with .048/1.22mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with .048/1.0mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This DESSLoc® abutment takes the locator insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.

This DESSLoc® abutment takes the locator insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.

Holder for VHF® N4 N4 Machines

2024 English Catalog

This adapter will fit into the Straumann® torque wrench and enables you to use the DESS latch drivers or any latch driver connected into it with click.

Fiduciary Marker for digital scan alignment for Photogrammetry, 4 pack, 8mmIt is a self-tapping screw and takes a Nobel® Unigrip/Star driver.• Head Diameter: Ø5.9mm• Head Height: 4.25mm• Screw Thread: M2.2mm

Fiduciary Marker for digital scan alignment for Photogrammetry, 2 pack, 8mmIt is a self-tapping screw and takes a Nobel® Unigrip/Star driver.• Head Diameter: Ø5.9mm• Head Height: 4.25mm• Screw Thread: M2.2mm

Fiduciary Marker for digital scan alignment for Photogrammetry, 4 pack, 6mmIt is a self-tapping screw and takes a Nobel® Unigrip/Star driver.• Head Diameter: Ø5.9mm• Head Height: 4.25mm• Screw Thread: M2.2mm

Fiduciary Marker for digital scan alignment for Photogrammetry, 2 pack, 6mmIt is a self-tapping screw and takes a Nobel® Unigrip/Star driver.• Head Diameter: Ø5.9mm• Head Height: 4.25mm• Screw Thread: M2.2mm

This is a final screw for the AngleBase® Ti bases that takes the DESS Angulated Screw Channel driver. Torque is 15ncm. It can be used to move the screw access hole up to 25 degrees in any direction. All of our screws are stress...