Megagen Anyridge® Compatible

This analog is for both stone model and digital model use. Anodized with the color blue. This is for the Megagen Anyridge platform for the following implant diameters - 4.0,4.5,5.0.5.5,6.0,6.5,7.0.7.5,8.0 mmD. The Megagen Anyridge 3.5 implant diameter...

This 10 pack of analogs is for both a stone model and a digital model use. Anodized with the color blue. This is for the Megagen Anyridge platform for the following implant diameters - 4.0,4.5,5.0.5.5,6.0,6.5,7.0.7.5,8.0 mmD. The Megagen Anyridge 3.5...

The AngleBase® ti base comes with an angulated screw, SKU 19.460 that takes the DESS angulated screw channel driver. The torque is 25 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

The AngleBase® ti base comes with an angulated screw, SKU 19.460 that takes the DESS angulated screw channel driver. The torque is 35 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction. This...

This dentist handle driver is made of stainless steel and is compatible with .048/1.20mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification. This dentist handle driver is...

This dentist handle driver is made of stainless steel and is compatible with .048/1.20mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification. This dentist handle driver is...

This dentist handle driver is made of stainless steel and is compatible with .048/1.20mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification. This dentist handle driver is...

This dentist handle driver is made of stainless steel and is compatible with .048/1.20mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification. This dentist handle driver is...

This is a final screw that takes a .048/1.20mm hex driver.  Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. This is for the Megagen Anyridge platform for the following...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings.  

This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.This scan body comes with the Manual Tool for...

This PEEK intra-oral scan body carrier enables you to tighten and loosen the intraoral scan body in hard to reach areas.These are autoclavable and reusable. 

This PEEK intra-oral scan body extender enables you to clip it on to the intraoral scan body in hard to reach areas.These are autoclavable and reusable. 

This latch style driver is made of stainless steel and is compatible with .048/1.20mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with .048/1.20mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with .048/1.20mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with .048/1.20mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This manual driver for intra-oral scan body enables you to tighten and loosen the intraoral scan body in hard to reach areas.These are autoclavable and reusable. 

This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.057 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. Torque is 25ncm. It is compatible with Astra® EV 4.2 and Megagen® AnyRidge. It can be used to move the screw...