Straumann Bone Level® Compatible

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 35 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This adapter will fit into the Straumann® torque wrench and enables you to use the DESS latch drivers or any latch driver connected into it.

DESS® Torque Wrench tool-Straumann® Type7 mm Hex ConnectionTorque Force: 10 - 70 Ncm

This titanium temporary abutment comes with a screw that takes a Straumann® Torx driver - SKU 19.032

This titanium temporary abutment comes with a screw that takes a Straumann® Torx driver - SKU 19.033

This titanium temporary abutment comes with a screw that takes a Straumann® Torx driver - SKU 19.098 This abutment is used on top of the Straumann Screw Retained Abutment (SRA) only.

This titanium temporary abutment comes with a screw that takes a Straumann® Torx driver - SKU 19.032

This titanium temporary abutment comes with a screw that takes a Straumann® Torx driver - SKU 19.033

This titanium temporary abutment comes with a screw that takes a Straumann® Torx driver - SKU 19.098 This abutment is used on top of the Straumann Screw Retained Abutment (SRA) only.

This ti base has a ⌀3.85mm and comes with a final screw, SKU 19.032 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 1.5mm collar height. To use this product correctly, it is needed a library update:...

This ti base comes with a final screw, SKU 19.033 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 1.2mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.033 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 2.0mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.033 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.098 that takes a Straumann® Torx driver. This abutment is used on top of the Straumann Screw Retained Abutment (SRA) only. The torque is 15 ncm. Wax up sleeve sold separately - SKU...

This ti base has a ⌀3.85mm and comes with a final screw, SKU 19.032 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 1.5mm collar height and is no longer being made with an anti-rotational flat...

This ti base comes with a final screw, SKU 19.033 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 1.2mm collar height and is no longer being made with an anti-rotational flat side. Wax up...

This ti base comes with a final screw, SKU 19.033 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 2.0mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve...

This ti base comes with a final screw, SKU 19.033 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 3mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve...

This ti base comes with a final screw, SKU 19.098 that takes a Straumann® Torx driver. The torque is 15 ncm and is no longer being made with an anti-rotational flat side. This abutment is used on top of the Straumann Screw...

This five pack of castable sleeves will fit on the DESS Non Engaging 15.098 Ti Bases for Straumann® SRA only.