Screws MIS® Seven Compatible

This is a final screw that takes a .050/1.27mm hex driver.  Torque is 30ncm.  This screw is compatible with MIS® Seven 3.0, MIS® C1 SP, and MIS® V3 NP. All of our screws are stress tested to 150% of the nominal...

This is a final screw that takes a .050/1.27mm hex driver.  Torque is 30ncm.   This screw is for MIS Seven, MIS C1 and MIS V3. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab...

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver.  Torque is 30ncm. It is compatible with Zimmer®/BioHorizons®/Implant Direct Legacy® - Internal Hex - 3.5, 4.5, and 5.7;...