This titanium temporary abutment comes with a screw that takes a Straumann® Torx driver - SKU 19.098 This abutment is used on top of the Straumann Screw Retained Abutment (SRA) only.

This titanium temporary abutment comes with a screw that takes a Straumann® Torx driver - SKU 19.098 This abutment is used on top of the Straumann Screw Retained Abutment (SRA) only.

This titanium temporary abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.081

This titanium temporary abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.081

This titanium temporary abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.081

This titanium temporary abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.081

This is a final screw that takes a Straumann® Torx driver.  Torque is 15ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.098

This ti base comes with a final screw, SKU 19.073 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.072 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.033 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.098 that takes a Straumann® Torx driver. This abutment is used on top of the Straumann Screw Retained Abutment (SRA) only. The torque is 15 ncm. Wax up sleeve sold separately - SKU...

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 1.5mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 1.5mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a wax up sleeve and a final screw,SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.8mm collar height.

This ti base comes with a final screw, SKU 19.073 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 3mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold...

This ti base comes with a final screw, SKU 19.072 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 3mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold...

This ti base comes with a final screw, SKU 19.033 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 3mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve...