This ti base comes with a final screw, SKU 19.057 that takes a .050/1.27mm hex driver. The torque is 35 ncm. This ti base has a 2mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold separately...

This analog is for both stone model and digital model use. Anodized with the color blue. This is for the Megagen Anyridge platform for the following implant diameters - 4.0,4.5,5.0.5.5,6.0,6.5,7.0.7.5,8.0 mmD. The Megagen Anyridge 3.5 implant diameter...

This ti base comes with a wax up sleeve and a final screw, SKU 19.024 that takes a 1.22mm hex driver. The torque is 24 ncm. This ti base has a 0.3mm collar height.

This ti base comes with a wax up sleeve and a final screw, SKU 19.024 that takes a 1.22mm hex driver. The torque is 25 ncm. This ti base has a 0.3mm collar height and is no longer being made with an anti-rotational flat side.

This analog is for both stone model and digital model use.

This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.070 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This is a final screw that takes a Straumann® Torx driver. Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This ti base comes with a wax up sleeve and a final screw, SKU 19.070 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 0.5mm collar height.

This ti base comes with a wax up sleeve and a final screw, SKU 19.070 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 0.5mm collar height and is no longer being made with an anti-rotational flat...

This analog is for both stone model and digital model use.

This ti base comes with a wax up sleeve and a final screw, SKU 19.005 that takes a Nobel® Unigrip/Star driver. The torque is 35 ncm. This ti base has a 0.3mm collar height.

This titanium analog is for both stone model and digital model use.  Anodized with the color green. 

This is a final screw that takes a Nobel® Unigrip/Star driver.  Torque is 15ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This ti base comes with a final screw, SKU 19.030 that takes a Nobel® Unigrip/Star driver. The torque is 35 ncm. This ti base has a 1.5mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.068 that takes a Nobel® Unigrip/Star driver. The torque is 15 ncm. This ti base has a 1.5mm collar height. Wax up sleeve sold separately - SKU 33.001P5 To use this product...

This ti base comes with a final screw, SKU 19.030 that takes a Nobel® Unigrip/Star driver. The torque is 35 ncm. This ti base has a 1.5mm collar height and is no longer being made with an anti-rotational flat side. Wax up...

This ti base comes with a wax up sleeve and a final screw, SKU 19.068 that takes a Nobel® Unigrip/Star driver. The torque is 15 ncm. This ti base has a 1.5mm collar height and is no longer being made with an anti-rotational flat...

This titanium analog is for both stone model and digital model use.  Anodized with the color blue. 

This analog is for both stone model and digital model use.

This is a final screw that takes a .050/1.27mm hex driver.  Torque is 30ncm.   This screw is for MIS Seven, MIS C1 and MIS V3. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab...