This healing abutment is screwed into the implant using a 1.22mm hex driver.

This healing abutment is screwed into the implant using a 1.22mm hex driver.

This straight abutment comes with a screw that takes a 1.22mm hex driver - SKU 19.024 It is a prep-able abutment with a 2mm collar height.

This straight abutment comes with a screw that takes a 1.22mm hex driver - SKU 19.024 It is a prep-able abutment with a 2mm collar height.

This straight abutment comes with a screw that takes a 1.22mm hex driver - SKU 19.024 It is a prep-able abutment with a 2mm collar height.

This ti base comes with a final screw, SKU 19.024 that takes a 1.22mm hex driver. The torque is 24 ncm. This ti base has a 0.3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.024 that takes a 1.22mm hex driver. The torque is 24 ncm. This ti base has a 0.3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a wax up sleeve and a final screw, SKU 19.024 that takes a 1.22mm hex driver. The torque is 24 ncm. This ti base has a 0.3mm collar height.

This ti base comes with a wax up sleeve and a final screw, SKU 19.024 that takes a 1.22mm hex driver. The torque is 24 ncm. This ti base has a 0.3mm collar height and is no longer being made with an anti-rotational flat side.

This ti base comes with a wax up sleeve and a final screw, SKU 19.024 that takes a 1.22mm hex driver. The torque is 24 ncm. This ti base has a 0.3mm collar height and is no longer being made with an anti-rotational flat side.

This ti base comes with a wax up sleeve and a final screw, SKU 19.024 that takes a 1.22mm hex driver. The torque is 24 ncm. This ti base has a 0.3mm collar height and is no longer being made with an anti-rotational flat side.  ...

This is a final screw that takes a 1.22mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.024P10

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a 1.22mm Hex Driver.

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a 1.22mm Hex Driver.

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a 1.22mm Hex Driver.

This analog is for both stone model and digital model use.

This analog is for both stone model and digital model use. It is also available in a pack of 10 - SKU 14.039P10

This analog is for both stone model and digital model use.

Type a description for this product here...

This is a final screw that takes a .048/1.20mm hex driver. Torque is 10ncm. It is compatible with 3i® Low Profile Abutments (the multiunit connection for 3i® Certain and 3i® Osseotite) only. All of our screws are stress...