This is a final screw that takes a Straumann® Torx driver. Torque is 15ncm. It is made for parts on top of the Straumann® 1.5 abutment or the DESS Converter abutment. All of our screws are stress tested to 150% of the nominal torque value...

This scan body is made of PEEK Plastic and is used for scanning on top of a multiunit abutment. Screw is provided - SKU 19.006 It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain®...

This is a final screw that takes a .050/1.27mm hex driver. Torque is 30ncm.  It is compatible with Zimmer®/BioHorizons®/Implant Direct Legacy® - Internal hex - 3.5, 4.5, and 5.7; and MIS® Seven - Standard and Wide. All of our...

This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm. It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain® Low Profile & 3i Osseotite®...

This scan body is made of PEEK Plastic and is used for scanning at the implant level. Screw sold separately - SKU 19.018

This scan body is made of PEEK Plastic and is used for scanning at the implant level. Included Screw - SKU 19.018

This scan body is made of PEEK Plastic and is used for scanning at the implant level. Screw included - SKU 19.017

This scan body is made of PEEK Plastic and is used for scanning at the implant level. With screw - SKU 19.016

This final screw that takes a 0.050/1.27mm Hex driver.  Torque is 15Ncm.It is compatible with Astra® Osseospeed 20º and 45º UniAbutments. It is compatible with the following top (Ø 4.8 mm) of Multiunit...

This is a final screw that takes a .050/1.27mm hex driver.    Torque is 25ncm.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 -...

This is a final screw that takes a .050/1.27mm hex driver.  Torque is 20ncm.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.016P10 

This is a final screw that takes a .048/1.20mm hex driver.  Torque is 20ncm.  It is compatible with 3i® Certain - Internal Hex - 3.4, 4.1, and 5.0. All of our screws are stress tested to 150% of the nominal torque value and can...

This scan body is made of PEEK Plastic and is used for scanning at the implant level. Screw sold separately - SKU 19.033

This is a final screw that takes a Straumann® Torx driver.  Torque is 35ncm.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.033P10

This is a final screw that takes a Straumann® Torx driver.  Torque is 35ncm.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.032P10

This is a final screw with a DLC coating that takes a Nobel® Unigrip/Star driver.  Torque is 35ncm. A DLC coating is a diamond like coating that provides a low friction surface for a better hold.  All of our screws are stress tested to...

This is a final screw with a DLC coating that takes a Nobel® Unigrip/Star driver.  Torque is 35ncm. A DLC coating is a diamond like coating that provides a low friction surface for a better hold. It is compatible with Nobel®...

This is a final screw with a DLC coating that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm.A DLC coating is a diamond like coating that provides a low friction surface for a better hold. It is compatible with the...

This is a flat seat final screw that takes a Nobel® Unigrip/Star driver.  Torque is 35ncm. It is compatible with Nobel® Branemark- 3.5 (NP). All of our screws are stress tested to 150% of the nominal torque value and can also...

This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.030P10